Advanced technologies
This revolutionary new 6 stage system uses Reverse Osmosis, Deionization and Carbon Filtration to put refreshing, clean water at your fingertips. No other system available anywhere can give you all three kinds of purification in a system that is so simple.
Using reverse osmosis technologies with deionization can actually remove 99.99% of contaminants found in water and provide people with perfect drinking water. Only this combination of technologies can ensure absolute purity and produce highest quality pure water.
Deionization (DI) filters
Deionization (DI) filter takes the full size RO to a higher level of filtration. It is an excellent filter, especially those who live in areas with exceptionally high levels of TOTAL DISSOLVED SOLIDS (TDS) in their tap water. The post deionizer takes the small percentage of contaminants that the membrane could not remove and filters this to greater than 99.99% pure. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm
For more information about deionization (DI) filter, please click
here.
Features:
3.2 Gallons NSF Standards Water Storage Tank.
FDA Approved Polypropylene Made Flat Cap Housing (double o'ring).
Automatic Shut-off Valve, Mini Flow Restrictor, Stainless Steel Check Valve.
Long Reach Chrome Faucet (upgrade faucet is acceptable)
Feed water connector.
Drain Saddle Valve.
Four Color Coded 1/4 inch Tubing for System Connection
Completely Assembled
100% Factory Tested and Sterilized Ready for Installation.
Installation Instruction.
CARTRIDGE FILTERS
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in removing dirt, rust and sand particles.
(Stage 2) Carbon Block Filter:
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.
(Stage 3) 1 Micron Sediment Filter :
With only 1 micron rating, provides effective filtration to protect your membrane. It provides for improved membrane performance up to 95% of TDS rejection.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane that processes 50 gallons per day. It remove the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.
(Stage 5) Post Carbon filter:
This carbon post filter removes objectionable tastes and odors to enhance the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water.
(Stage 6) Deionization (DI) Filter:
Produce 99.99% pure water by simply attaching this convenient deionization filter with RO unit. Convenient post RO filtration DI unit (RO/DI unit) provides crucial supplemental filtration to remove most impurities for pure polished product water. Excellent in areas with hard water. Produce 99.99% pure water. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm
Specifications:
Membrane: 50 GPD / 189 LPD
Operation pressure: 50 -100 psi
Dimensions: (cm) 37 (L) x 45(H) x 20 (W) - system
(cm) 28 (L) x 28(W) x 35 (H)- tank
Weight: 8 kg - system